The Secret ThinkPad Powerbutton Code to Bring Dead Laptops Back to Life (2007)
Points and comments are a snapshot, not live.
Pressing a ThinkPad's power button ten times then holding it for 30 seconds can revive a dead laptop.
In 2007, a Lenovo ThinkPad z61t owner found his laptop completely dead-no lights, no response. An IBM support tech instructed him to unplug the AC adapter, remove the battery, press the power button ten times at one-second intervals, then press and hold it for 30 seconds. Reinserting the battery and pressing power revived the machine. The tech attributed the fix to static discharge, likely draining residual charge from capacitors. The trick has since been reported to work on many ThinkPad models, from T41 to X200, and occasionally on other laptops.
Hundreds of commenters over 15+ years confirmed the fix, though a few reported it failed and found success through other steps like removing the CD drive or reseating RAM.
What commenters are saying
Commenters largely confirmed the trick works across many laptops, not just ThinkPads. They explained it drains residual charge (flea power) from capacitors, resetting the embedded controller. Several noted it is standard troubleshooting for bricked devices: unplug all power, hold the power button for 10-30 seconds. Some pointed out newer ThinkPads use a tiny pinhole reset for the same purpose. A few reported the trick failed but found alternatives like removing the CD drive or leaving the laptop unplugged for days.